UL1581 High Frequency Wire Testing Equipment , Cable Spark Testing
Machine
Product Description:
Testing equipment for wire and cable
High-frequency Spark tester for wire and cable production line with
CE certificate:
SS015K series high-frequency spark tester is an efficient and
reliable product inspection device that can
be used to precisely detect the broken skin, pinhole and bare
copper of the conductor of the various wire
and cable. It can detect the defective layer without damaging the
inside electrical conductor. By using
high frequency (3KHZ) and high volte electrode to replace
traditional (50/60HZ) high volt electrode, its
electrode tip can select a 50mm beaded-contact, copper brush,
carbon brush or a roller, which can
shorten installation dimension greatly and enhance detection speed
to be ranging from 1000m/min to
2400m/min. This device developed based on Taiwan, Europe and
American technology combination is
very reliable and smart.
Specifications:
Test Voltage:1.0~15.0KV. Cable Diameter: 0~25mm. Output Frequency:
2.5-3.5KHz normal. Fast
recovery time after fault (0.1s)
The Sine Wave Spark Tester is a fast and reliable instrument used
in distinguish wire faults and
detecting bare wires. Its high-speed fault detection feature gives
you prompt information without
worsening the condition of the wire after the test.
The use of high frequency (3KHz) enables a traditional commercial
power frequency bead chain
electrode to be shortened to 120mm HS015E Model.
The Sine Wave Spark Tester is quality-assured to meet your needs.
Basic Function
1. Fast recovery time after fault (0.1 second).
2. Occupies short space in line and with improvement factor of 50
compared to
3. traditional CT power frequency electrode.
4. Voltage Display: 0.0~15.0KV digit, 14.2mm LED display, Accuracy
+/- 1% of reading
5. Output Control: Front Panel Reset in Manual Mode. Closure time
is selectable
6. 0.2s/2s/5s in main board by jumper JP, Form C relay contacts
(250VAC/5A) for all
7. wire faults detected.
8. Limits the fault current without damaging the test equipment.
9. Short exposure time to corona does not degrade nor damage good
insulation.
10. Distinguishes all wire faults and detects bare wire.
11. Safety Switch interlock.
Standard:
GB3048, CE, GB3048,UL1581
Specification | YYW007 |
Output Voltage | 0.0~15.0KV R.M.S. |
Test Voltage | 1.0~15.0KV R.M.S. |
Cable Diameter | 0~25mm |
Maximum Load Current | 4mA Resistive,40mA Capacitive |
Output Frequency | 2.5-3.5KHznormal |
Electrode lengths | Bead Chain 120mm |
Fault Indication | Indicating lamp,Counting by Digital Counter |
Output Control | 1 Form C relay Contacts(220VAC/5A)for all wire faults and bare wire
faults detected |
Input Control | SP1, SP2 input interlock control |
Operating Model | Extruder Continuous Application |
Power Source | 175~264 Volts, 180VA, Single phase, 50/60 Hz |
Operation Temperature | +4~45°C |
Operation Humidity | <90%RH |
Signal Cable Lengths | 5M |
Weight | Control Unit =5 kgs, Electrode = 8.5 kgs |
Dimension Controller | 360(L)x485(W)x90(H) mm |
Gauge Head | 330(L)x200(W)x390(H) |
Line Speed | 2000 M/min. maximum |
DONGGUAN YUYANG INSTRUMENT CO.,LTD is Located in Wanjiang District
(Dongguan City, Guangdong Province,China),a famous historical town
with prosperous industry and convenient transportation.
Our Company:
We are a high-tech enterprise which is specialized in developing
and manufacturing Fire Testing Equipment, Building Material Fire
Tester, Wire and Cable Fire Tester, Environmental Test Chamber,
Textile Testing Equipment, Toys Testing Equipment and etc.
Decades of research and development strengthen the leading edge of
YUYANG in this field, and established as an crucial role in R&D
on high quality and high-cost performance of testing equipment.
YUYANG's testing equipment are widely used in various field:
scientific institutions, colleges, inspection institutions, auto
parts, electronics, electricals, lithium battery, LED,
photoelectricity, mobile, plastic and rubber, display,
telecommunication, chemical industry, aerospace, building material
and product, wire and cable, toys, furniture, textile and fabrix,
etc.
All YUYANG testing equipment are designed according to
international test standards, such as ISO, ASTM, DIN, EN, GB, BS,
JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.
FAQ:
1. who are we?
We are based in Guangdong, China, start from 2018,sell to South
Asia(20.00%),Eastern Asia(20.00%),Domestic Market(15.00%),Southeast
Asia(15.00%),Eastern Europe(10.00%),North
America(10.00%),Oceania(5.00%),Western Europe(5.00%). There are
total about 11-50 people in our office.
2.what can you buy from us?
Fire Testing Equipment,Environmental Test Chamber,Textile Testing
Equipment,Toys Testing Equipment,Wire and Cable Test Machine
3. why should you buy from us not from other suppliers?
We are a high-tech enterprise which is specialized in developing
and manufacturing Fire Testing Equipment, Building Material Fire
Tester, Wire and Cable Fire Tester, Environmental Test Chamber,
Textile Testing Equipment, Toys Testing Equipment and etc.
Our honor
